Description

Connect your Elite Dash system to a compatible vehicle or aftermarket ECU CAN network using the ED CAN Adapter. Designed for reliable CAN bus communication, this compact interface supports CAN 2.0A and CAN 2.0B protocols with data rates of up to 1 Mbit/sec.

The adapter features selectable 120-ohm termination and a dedicated bootloader-mode jumper, giving installers greater control during system setup, configuration, and diagnostics. Clearly marked screw terminals help simplify connections for power, ground, CAN Low, CAN High, and termination.

Key Features

• Connects Elite Dash systems to compatible CAN networks
• Supports CAN 2.0A and CAN 2.0B
• Data rate of up to 1 Mbit/sec
• Jumper-controlled 120-ohm CAN termination
• Dedicated jumper for bootloader mode
• Clearly labeled connection terminals
• Compact design for clean vehicle installation
• Suitable for ECU communication and CAN diagnostics
• Compatible with supported CAN analyzers
• Designed for performance, motorsport, and custom vehicle applications

Supported ECU Systems

• MaxxECU
• MoTeC
• Syvecs

Connections

• VIN: Voltage input
• GND: Ground
• CL: CAN Low
• CH: CAN High
• TR: Termination

The Elite Dash ED CAN Adapter provides a practical and professional solution for linking your digital dashboard to supported CAN-based systems. Its configurable termination, bootloader access, and compact construction make it suitable for installers, tuners, and advanced vehicle builds.

Compatibility depends on the ECU, CAN protocol, dashboard configuration, and available CAN data stream. Professional installation and configuration are recommended. Confirm system compatibility before ordering.