Elite X uses a single 35 pin main connector carrying power, CAN, sensor inputs, digital inputs, control outputs, screen power and camera AV connections.
| Group | Connections |
| Power | Battery +12V, ground |
| Screen power | 1 x switched 12V output for screen |
| Ignition and wake | 1 x ignition input, 1 x door input for screen wake-up |
| CAN | CAN H, CAN L |
| Sensor supply | 1 x 5V sensor reference, 1 x sensor ground |
| Analog inputs | 8 x universal analog inputs, 0V to 5V |
| Digital inputs | 2 x high speed digital and frequency inputs |
| Outputs | 2 x low side outputs, 2 x PWM and frequency outputs |
| Camera | 4 x camera AV inputs, 1 x AV output |
[DIAGRAM] Annotated connector face diagram with every pin numbered and named directly on the image, viewed from the wiring side.
⚠️ Do not feed more than 5V into an analog input. The inputs are rated 0V to 5V. A 12V signal into an analog input damages the module.
Related: How to Set Up an Analog Sensor on Elite X · How to Set Up an Output on Elite X · What the Elite X Smart Control Module Does
